Description

DELL PowerConnect N4032. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 24, USB 2.0 ports quantity: 1, Console port: RJ-45. MAC address table: 131072 entries, Switching capacity: 640 Gbit/s. Networking standards: IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE.... Rack mounting, Form factor: 1U

Upgrade your network

N-Series is a family of energy-efficient and cost-effective 1GbE and 10GbE switches designed for modernizing and scaling network infrastructure. The N4000 Series allows you to apply 10/40GbE wire-speed flexibility to your existing campus network with high-performance, non-blocking switches that: Use MLAG for multipath loop-free redundancy without spanning tree to enable full-bandwidth utilization and high availability Promote greater interoperability through interfaces with Cisco's Rapid Per VLAN Spanning Tree (RPVST+)1 and devices using Cisco Discovery Protocol (CDP) Offer a more flexible choice in your network by uniting products with the latest open standard protocols Feature advanced IPv4 and IPv6 Layer 3 routing, security and scalability features Converged network support for DCB with Priority Flow Control (802.1Qbb), ETS (802.1Qaz), DCBx, iSCSI TLV Support. Plug-and-play configuration with Dell EqualLogic iSCSI storage arrays with one-command iSCSI setup that alleviates multiple-step configuration and potential configuration errors Include OpenFlow 1.3 support for interoperability with industry-standard OpenFlow controllers.

Designed for efficiency

Built to help keep operating costs down, the N4000 Series has Fresh Air capability, enabling them to operate at temperatures up to 113°F (45°C) to help reduce cooling costs. Features designed to improve overall efficiency include: Dual hot-swappable 80PLUS-certified efficient internal power supplies Redundant variable-speed cooling fans Energy-Efficient Ethernet and low-power PHYs to help reduce power to inactive ports and idle links

Advanced feature set to simplify management

The Dell Networking N4000 Series is designed for easy deployment, outstanding interoperability and a low learning curve for network administrators. A single OS release (Dell Networking OS 6) allows you to maintain consistent configurations across all N-Series products with a comprehensive feature set that includes: One common command line interface (CLI) and graphical user interface (GUI) that use a well-known command language to help skilled network administrators become productive quickly USB auto-configuration that helps network administrators rapidly deploy mirrored configurations to numerous devices by simply inserting a USB key A variety of enterprise-class features with familiar and intuitive configuration and management commands The latest open-standard protocols and smart integration technologies to help make smoothly operating multi-vendor networks possible

Deploy with confidence at any scale

The resilient stacking architecture of the N4000 Series provides reliable network performance and amazing density for demanding network environments. It also helps future-proof your network investments as enterprises migrate from 10GbE core deployments to 40GbE. • Data rates up to 1.28Tbps (full duplex) and a forwarding rate of up to 952Mpps • Scale easily with 10/40Gbps user port stacking supporting up to 160Gbps on N4032 and 320Gbps on N4064 (full duplex) at distances up to 100 meters • Up to 64 line-rate 10GbE ports per switch using breakout cables and up to 672 10GbE ports in a twelve-unit stack • Hot swap expansion module supports dual port QSFP+ (8 x 10GbE), quad port 10GBaseT and quad port SFP+ • Switch stacks up to 12 units can be managed via flexible user port stacking at 10Gbps or 40Gbps speeds • Tool-less ReadyRails kit allow switches to be installed in moments

Product Properties

Manufacturer
Dell

Model
210-ABVS

EAN
4053162983502

Data transmission

MAC address table
131072 entries

Number of static routes
1024

Packet buffer memory
9 MB

Switching capacity
640 Gbit/s

Throughput
476 Mpps

Design

Certification
ACMA RCA, ICES, CCC, CE, VCCI, FCC, NRTL UL, EAC, GS, WEEE, RoHS, REACH, JEL

Form factor
1U

Product colour
Black

Rack mounting
Y

Stackable
Y

Management features

MIB support
Y

Quality of Service (QoS) support
Y

Switch layer
L3

Switch type
Managed

Multicast features

Multicast support
Y

Network

10G support
Y

Auto MDI/MDI-X
Y

Auto-sensing
Y

Broadcast storm control
Y

Flow control support
Y

Link aggregation
Y

Networking standards
IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Number of VLANs
4096

Port mirroring
Y

Spanning tree protocol
Y

Operational conditions

Operating relative humidity (H-H)
0 - 90%

Operating temperature (T-T)
0 - 50 °C

Storage relative humidity (H-H)
0 - 95%

Storage temperature (T-T)
-20 - 70 °C

Performance

Firmware upgradeable
Y

Flash memory
256 MB

Ports & interfaces

Console port
RJ-45

Switch Number of Ports
24

Switch Port Speed
10G Ethernet (100/1000/10000)

USB 2.0 ports quantity
1

Power

Number of power supply units
2

Power consumption (typical)
240 W

Redundant power supply (RPS) support
Y

Power over Ethernet (PoE)

Power over Ethernet (PoE)
N

Protocols

Management protocols
SNMPv1/2/3

Supported network protocols
TCP, UDP, HTTP

Security

Access Control List (ACL)
Y

IGMP snooping
Y

SSH/SSL support
Y

Weight & dimensions

Depth
460 mm

Height
43.4 mm

Weight
9.83 kg

Width
433.8 mm

DELL PowerConnect N4032 Managed L3 10G Ethernet (100/1000/10000) 1U Black

Description

Product Properties